Automatic TV Guard Power Surge Protector Voltage Protector Socket for Media Boxes & DVD 220W (13Amps) - White

Description

Power fluctuations, sudden blackouts, and voltage surges from the mains can permanently damage your TV/DVD. The Automatic TV/DVD Guard acts as your first line of defense, instantly disconnecting power when voltage drops below or rises above safe levels. Smart Automatic Delay Timer When power returns after a blackout, it often comes back with a massive surge. This Fridge Guard features an automatic 3-minute wait delay. It monitors the incoming power and only sends electricity to your TV once the current has fully stabilized, saving you thousands of shillings in repair bills. Easy-to-Read LED Status Lights No guesswork required! The front panel features bright indicator lights to let you know exactly what’s happening: OFF: Power is disconnected because the incoming voltage is unsafe. WAIT: The guard is safely delaying power connection until voltage stabilizes. ON: Voltage is perfectly safe, and your appliance is running normally. Bypass Feature Includes a convenient central Bypass button if you need to override the delay timer when you are certain the power supply is completely stable. Product Specifications & Key Features Feature Technical Details Recommended 100 % Model GUARD Max Current 13 Amps Operating Voltage $220\text{V}-240\text{V AC}$ Delay Period 30 Seconds – 1 Minute Ideal Application Smart TVs, LED Screens, DVD Players, Home Theaters, Decoders Socket Type 13A Universal Socket (Standard UK/Kenya 3-Pin) OPERATING INSTRUCTIONS Without doubt, power interruptions cause major problems for home and business computing, An unpredicable power supply can lead to worrying problems events such as surges, spikes, brownouts and utility, failures. If any of these should occur there 's a strong chance you will sufer from loss of critical data, lowered productvity and even damage to your expensive equipment. PLEASE READ CAREFULLY The Fridge guard is an under voltage protection device rated a 13 AMPS. The Fridgeguard will disconnect if the mains goes below a pre-set limit and reconnect automatically only after the supply has returned to acceptable limits for the duration of the wait time. Make sure that your load does not exceed the rating of the Fridge guard which 13 AMPS. If exceeded, the TV guard may be damaged, and the warranty will be void Plug the Fridge guard into the mains and plug your appliance into the Fridge guard. Do not connect more than one appliance to the Fridge guard. On first switching on, the red LED will indicate and there will be no output while the Fridgeguard monitors the mains. if the mains level is acceptable, the yellow LED is litindicating that the Fridgeguard is in wait mode. At the end of the wait time and if the supply is above the lower limit the green LED goes on and the load is connected. It is recommended that the Fridge guard is kept switched on, and the appliance switched on and off as required, to prevent activating the time delay everytime the appliance is switched on. If the red LED shows, the incoming voltage is too low and the Fridge guard will switch off the power to protect your appliance. When the voltage returns to acceptable limits, the LED will go to yellow. activating the time delay. 30 secs later, the green LED go se on and normal power is connected to your appliance.